|
|
| |
 |
|
|
 |
© 1996-2010
DIAMANT Metallplastic GmbH |
|
What causes
micropores & hairline cracks?
|
casting, machining, welding,
wear & tear, metalizing (metalspray)
conventional methods to seal micropores & hairline cracks require…
high investments,
in machineries,
in trained personnel,
in working time,
in space and energy consumption,
in several working steps.
|
|
|
|
dichtol Impregnation Methods however, are uncomplicated…
Simply…
brush, fill, spray, dip or inject and after that? Put back without lack!
No investments,
no local restriction,
no special knowledge,
no energy consumption.
|
|
Impregnation
in place on spots,
or large areas,
without pressure,
without vacuum,
without temperature,
for all metal alloys,
ready for use (no mixing),
colourless (no optical changes),
cures at room temperature.
|  |
|
 |
dichtol is used everywhere...
Single parts - impregnation
Small lots - impregnation
Series - impregnation
(in dipping container) |
|
The dichtol
Capilliary-Impregnation-Method...
is based on the principle of surface tensions, weting phenomena and fine tuned viscosities.
Dissolved polymers penetrate without vacuum and pressure into porosities and hairline cracks. |
 |
 |
dichtol capilliary test…
2 glass plates are clamped together and are put upright for 1 minute in a lid filled with dichtol.
dichtol penetrates on ground of its excellent capilliary activity (=creeping properties) against the gravity of the earth and rises approx. 55 mm.
(dichtol was coloured in black for easier detection.)
|
|
|
|
|
